spec no: dsaa4840 rev no: v.4 date: mar/25/2005 page: 1 of 3 approved: j. lu checked: allen liu drawn:h.q.yuan package dimensions l - 4060xh/3id high efficiency red description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. 1.8mm tri - level led indicator features z pre - trimmed leads for pc mounting. z i.c. compatible. z black case enhances contrast ratio. z wide viewing angle. z high reliability life measured in years. z ul rating : 94v - 0. z housing material: type 66 nylon. z rohs compliant. notes: 1. all dimensions are in millimeters (inches) . 2. tolerance is 0 .25(0.01") unless otherwise noted . 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice .
spec no: dsaa4840 rev no: v.4 date: mar/25/2005 page: 2 of 3 approved: j. lu checked: allen liu drawn:h.q.yuan selection guid e n ote: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c part no. dice lens type iv (mcd) @ 10ma viewing angle min. typ. 2 1/2 l - 4060xh/3id high efficiency red (gaasp/gap) red diffused 8 15 70 symbol parameter device typ. max. test conditions units peak peak wavelength high efficiency red 627 nm i f =20ma d dominant wavelength high efficiency red 625 nm i f =20ma ? 1/2 spectral line half - width high efficiency red 45 nm i f =20ma c capacitance high efficiency red 15 pf v f =0v;f=1mhz v f forward voltage high efficiency red 2.0 2.5 v i f =20ma i r reverse current high efficiency red 10 ua v r = 12v parameter high efficiency red units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 160 ma reverse voltage 5 v operating/storage temperature - 40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base.
spec no: dsaa4840 rev no: v.4 date: mar/25/2005 page: 3 of 3 approved: j. lu checked: allen liu drawn:h.q.yuan high efficiency red l - 4060xh/3id remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
